RSS Feed
Knowledgebase : General Articles
First, we need to configure the 3rd party VPN in Meraki. This needs to be done on both Meraki appliances. In the Meraki portal, select the proper network, then navigate to SECURITY APPLIANCE > SITE-TO-SITE VPN. From there, make sure the Type is set to ...
In this blog we will detail the common methods that paging is delivered over an IP network and discuss how these methods are deployed over a network infrastructure such as an IP PBX like 3CX or Asterisk, paging endpoints, IP Phones for desktop paging, ove...
Configuring the system is very simple. Before you start please ensure you have access to the email sent to the registered user on the Cogentvoip.com account with the account info. This email is sent after you register and order your plan(s) and contains t...
   1. 1. Provisional 1xx          1. 1.1. 100 Trying          2. 1.2. 180 Ringing          3. 1.3. 181 Call Is Being Forwarde...
VoIP : Voice over Internet Protocol / Voice over IP ADSL : Asymmetric digital subscriber line. Type of DSL connection where data flow is greater in one direction than the other. ATA : Analog Telephone Adapter Unit to connect a regular anaog phone to the i...
Some Gateways do not detect a busy tone, dial tone or hangup correctly. This is often caused because the device is pre-configured for use in the USA, and does not understand the call progress tones of your country. In this case you will need to configure ...
IP-PBX - side: In order to register a remote IP phone with an IP-PBX , you must forward the following ports.  Inbound traffic on these ports from the Internet must be forwarded to the internal private IP address of your IP-PBX:     *...