RSS Feed
Knowledgebase : Cisco/Linksys Articles
First, we need to configure the 3rd party VPN in Meraki. This needs to be done on both Meraki appliances. In the Meraki portal, select the proper network, then navigate to SECURITY APPLIANCE > SITE-TO-SITE VPN. From there, make sure the Type is set to ...
Cisco Call Manager Express Bell Commander Configuration Guide
If you can match the impedance setting expected by your country's PSTN, you will have much better results in detecting the proper state of your PSTN line as well as have better audio quality. The following settings apply to various countries:  &nbs...