Start a conversation

Polycom

  • Paging with Polycom Phones using Alert-Info.

    <p><strong>What is Alert-Info and how can it be used for paging with Polycom IP Phones?</strong></p> <p><br />When present in an INVITE request, the Alert-Info header field can activate features like ...

  • Configuration Guide: Adjusting the Contrast on Polycom IP Series Expansion Modules

    Overview: In this guide, we will show you how to adjust the contrast of your expansion module. Sometimes the expansion module may appear to be defective, because it is very light or dark, compared to ...

  • How to Program keys on a Polycom IP Phone

    Polycom phones support speed dial configuration via the phone's interface. Configure Speed Dial Keys    1. Press Menu    2. Press 1 Features    3. Press 1 Contact Directory    4. Press Add    5. Fill ...

  • How to Install Firmware on a Polycom Phone

    1)    Power down your Polycom Telephone System. 2)    Download newest Polycom Firmware and Launch Pumpkin TFTP Program 2a.    Download and Install Pumpkin (http://kin.klever.net/dist/pumpkin-2.7.2.exe...

  • Setting the Time on Polycom and Asstra Phones with Trixbox Pro

    Phones local to the trixbox Pro use a Network Time Service in order to synchronize with the accurate, local time.  This Time Service comes in the form of an IP address given to the phone by the trixbo...

  • How to Restore Factory Defaults/Format a Polycom Phone

    Reset Local Config to factory Default -------------------------------- Step 1: Press the 'Menu' key. Step 2: Select 'Settings'. Step 3: Select 'Advanced'. Step 4: Enter in your admin password to the p...

  • Setting the Time on Polycom and Asstra Phones with Trixbox Pro

    Phones local to the trixbox Pro use a Network Time Service in order to synchronize with the accurate, local time. This Time Service comes in the form of an IP address given to the phone by the trixbox...

  • Polycom mac-directory.xml file editing

    In most asterisk server deployments, Polycom phones are provisioned via files that are located in the /tftpboot directory of your server. Every time you reboot a given phone it will pull down its conf...

  • How to Install Firmware on a Polycom Phone

    1) Power down your Polycom Telephone System. 2) Download newest Polycom Firmware and Launch Pumpkin TFTP Program 2a. Download and Install Pumpkin (http://kin.klever.net/dist/pumpkin-2.7.2.exe) 2b. To ...

  • How to Program keys on a Polycom IP Phone

    Polycom phones support speed dial configuration via the phone's interface. Configure Speed Dial Keys 1. Press Menu 2. Press 1 Features 3. Press 1 Contact Directory 4. Press Add 5. Fill out the setting...