How to Configure CogentVoip Service with Talkswitch

Configuring the system is very simple. Before you start please ensure you have access to

the email sent to the registered user on the Cogentvoip.com account with the account info.

This email is sent after you register and order your plan(s) and contains the account information you need to complete the setup process.

1. Download the talkswitchTM Start Guide from:

http://talkswitch.com/support/phone_system_vs/documentation.aspx

Follow the steps to install the system.

2. With the talkswitchTM configuration software already installed, open the software

and connect to your talkswitchTM system. Select ‘System Information’ and then ‘IP

Configuration’.

3. Under ‘Set IP Settings’: If the talkswitchTM is getting its IP and DNS information from another system set‘Obtain IP and DNS information automatically’. Otherwise set ‘Use the

following IP and DNS information’ and leave the preferred and alternative DNS

settings empty.

In the ‘Public WAN IP Address’ box select ‘static’ and enter your public IP

address provided by you Internet Service Provider (Cogentvoip.com preferred

configuration). If your public IP address is dynamic (changes), select ‘dynamic’

and complete the other fields as appropriate for you system.

4. Select ‘System Information’ and then select ‘VoIP Configuration’, and finally select the

• In the ‘Service Provider Name’ field, enter Cogentvoip.com.

• In the ‘Proxy Server Name’ field, enter Cogentvoip.com.

• In the ‘Registrar Server Name’ field, enter Cogentvoip.com.

• In the ‘Outbound Proxy’ field, enter Cogentvoip.com.

• In the ‘Realm/Domain’ field, enter Cogentvoip.com.

5. In the ‘VoIP Lines’ fields you can enter the number of simultaneous calls you can

support.

• If using Cogentvoip.com’s Business Unlimited plan these fields should be set to the

number of plans you have (e.g. 3 Business Unlimited then set the parameters

to 3).

• If you subscribe to Cogentvoip.com’s Business Office or Business Pro then the

number of simultaneous calls is unlimited within the capacity of your Internet

access bandwidth. You will require 160 kbps per call if your codec’s are

configured for G.711 and 48 kbps per cal if your codec’s are configured for

G.729. Please take into account the usage of data applications if you are

sharing the Internet access with you data applications.

6. Select ‘System Information’ and then select ‘VoIP Numbers’. Select a VoIP

Number tab and check the ‘Activate VoIP Number’ box, then click on the ‘Service

Provider Profile’ button as shown in Figure 3 below.

• Enter you phone number in the ‘Phone Number’ box.

• From the Cogentvoip.com Account Setup email, obtain the ‘Authentication Username’

and enter it in to the ‘User/Account’ field. Please ensure you have no hidden

characters or trailing spaces.

• From the Cogentvoip.com Account Setup email, obtain the ‘Authentication Password’

and enter it in to the ‘Password’ field. Please ensure you have no hidden

characters or trailing spaces.

NOTE: If you have more than one Cogentvoip.com number, select additional VoIP number

tab(s) and repeat step 11 for each number.

7. Select ‘System Information’ and the select ‘Line Hunt Groups’. Select a Hunt

Group to use for accessing the Cogentvoip.com service and ensure Line Type is set to

Cogentvoip.com VoIP Numbers. In Figure 4 below, Hunt Group 88 is configured to access all

available VoIP lines. For convenience, you can assign a name to the selected Line Hunt

Group (e.g. Cogentvoip.com).

8. This step is Optional. The talkswitchTM is set to G.729 codec by default which

requires 48 kbps per call. This maximizes the number of simultaneous calls, and

provides basic audio quality. Alternatively you can select the G.711 codec, which

maximizes audio quality and supports Fax, but may limit the number of simultaneous

VoIP calls as it requires 160 kbps per call.

• To select G.711, select ‘System Information’ and then select ‘VoIP

Configuration’ then select the Service Provider 1 Profile tab, then select the

‘Codec Options’ button. In the ‘Codec Options’ dialog window, use the menu

to set the ‘Preferred Codec’ to G.711.

9.) Save settings to by selecting ‘File’ from the menu and then ‘Save to TalkSwitch’.

10.) On your firewall open the following ports:

5060 UDP Signalling

• 6000 – 6006 UDP (Map to IP address of TalkSwitch Unit ID 1)

• 6010 – 6016 UDP (Map to IP address of TalkSwitch Unit ID 2)

• 6020 – 6026 UDP (Map to IP address of TalkSwitch Unit ID 3)

• 6030 – 6036 UDP (Map to IP address of TalkSwitch Unit ID 4)

11.) Confirm that your VoIP Number(s) have registered. Select ‘System Information’ then

select ‘VoIP Numbers’ and select a Cogentvoip.com number tab. At the bottom of the page,

click on the ‘View Registration Status’. The ‘Registration Status’ window will open,

showing the registration status for each Cogentvoip.com number.

If the status shows a “Not Registered” result then there is a problem with the

configuration or connection to the network. If so, double-check that all information

entered in the steps above is correct.