First, we need to configure the 3rd party VPN in Meraki. This needs to be done on both Meraki appliances. In the Meraki portal, select the proper network, then navigate to Security Appliance > Site-to...
Overview: Network captures are one of the most useful tools while troubleshooting VoIP systems and resolving network related issues. Since more and more servers are being installed on Linux due to the...
Trixbox / Asterisk Bell Commander Configuration Guide...
1) Download and Install Pumpkin (http://kin.klever.net/dist/pumpkin-2.7.2.exe) 2) To Download the newest firmware, visit the 888VoipStore.com support downloads site at www.888Voipstore.com/suppo...
1) Power down your Aastra Telephone System. 2) Hold down the number 1 and # key(s). 3) Power on your Aastra Telephone System. 4) Continue to hold down 1 and # key(s) while the system initi...
VoIP : Voice over Internet Protocol / Voice over IP ADSL : Asymmetric digital subscriber line. Type of DSL connection where data flow is greater in one direction than the other. ATA : Analog Telephone...
These steps should work for all Aastra Wireless Handsets. Keep in mind, there is a limitation of 4 handsets per base station. During this process, keep the handset within 3 feet of the base station. O...
1. Ensure that you have created the extension that you wish to use with the phone in your PBX first. Take note of the ID field and the password that you have entered for the extension. 2. Connect t...
Some Gateways do not detect a busy tone, dial tone or hangup correctly. This is often caused because the device is pre-configured for use in the USA, and does not understand the call progress tones of...
The process for installing trixbox CE on an appliance is very similar to the normal install process. 1.) Download the trixbox CE ISO (http://www.trixbox.org/downloads) 2.) Burn the ISO image to a CD. ...